C.44 NOVIK Tube Converter PRO 3 adapter E88CC 6N2P 6N6 TO(instead) ECC83 82,81,12AX7
The main difference from other models!
Forced application of PCB
This is caused by the internal size of 18mm
To do this, Novik designed and manufactured a PSB board with double-sided gold plating 2 mm thick.
This solution allows you to have models with internal LED lighting of different colors!
The outer dimension of 22 mm allows the saver to be used in a huge number of amplifiers, for which our previous models were not suitable!
The seiver has an adjustable projection size of gold-plated pins from 15 mm or less.
The converter has no parts made in China!!
Such contacts have a resource ten times greater than a standard panel
The original combination of two ceramic panels of different types, produced in the USSR at military factories
Contacts are really silver plated from a very high quality material (they can withstand a lot of installation cycles) (silver plated 6 micron bronze contacts ( BrOF6,5-0 15))
Gold pins are used
Closing of non-matching filament contacts is made with a wire with a diameter of 0.8 mm
Applied duplication of each contact
The customer can choose the height of the aluminum cap (Nameplate) from 55mm 70mm 75mm
Collapsible design - service is possible in case of deformation of a thin pin (1mm)
Unfortunately, pin deformation is a common case when incorrect installation by an inexperienced user.
In this series of savers and converters, Novik uses the best ceramic socket ever produced in Russia (and in the world)
High-quality silver coating of contacts (9-12 microns) and a contact profile similar to PL8-2K
NOVIK tests 1000 tubes using the same saver